Showing 1–24 of 89 resultsSorted by price: high to low
-
Concrete Grooving Bullfloat
€420.00Concrete grooving bullfloat C/W Knucklehead and 3 handles
The Multi Track Bullfloat Produces a Uniform Sharp Groove in Concrete
36″ x 8″ blade
Groove Dept 1/4″ and width 1/4″
-
36″ Double Roller Tamper
€350.00The 36″ Roller Tamper / Rollerbug is used for depressing the aggregate and raising the fat in fresh concrete. Ideal for big areas and poles can be attached to increase reach.
- Robust and durable design
- Makes for easy tampering of concrete
- Extendable poles can be attached
- Easy to use
Available to purchase / hire, please conatct us for any further information.
-
Big Blue Bullfloat Kit
€320.004Ft x 12″ Blade C/W Knucklehead and 3 handles.
A blue carbon steel float to provide a super smooth finish. Supplied with a tilt bracket and 3 bullfloat button handles.
These handles clip in to each other and clip in to the tilt bracket on the bullfloat.
By turning the handles to the left or the right will tilt the bullfloat blade -
Imprinted Concrete Reseal Kit
€220.0025 x Liters of seal
1 x Tub of colour tint
1 x Tub of crete grip
1 x Brush
For a limited time only
-
Chaplin Sprayer
€220.00The Chapin Industrial Concrete Sprayer is ideal for use with the Creteprint Lusterseal range as it provides even coverage when sealing/re-sealing concrete surfaces.
- Tri-poxy lined steel tank that provides triple protection against rust, corrosion and denting.
- Reinforced hose to prevent splitting
- Interchangeable nozzles to adjust coverage
- Tri-Lock seal that insures the pump cap locks tightly into place to prevent spillage and leakages.
- 13.2 litre tank
-
Gloss Lusterseal
€180.00Creteprint® Lusterseal Gloss is a high quality, clear, solvent based sealant which gives a professional, glossy finish for your driveway or patio on both imprinted concrete and block paving.
Average coverage is 3.5sqm/per litre.
- Enhances colour
- Excellent Coverage
- Durable and hard-wearing
- Easy to use and fast-drying
- Resistant to chemical including petrol and oil spillages
- Range of finishes
- Colour tints and Anti-slip additives are available
-
Matt Lusterseal
€180.00Creteprint® Lusterseal Matt is a high quality, clear, solvent based sealant which gives a professional, low-sheen finish for your driveway or patio on both imprinted concrete and block paving. Average coverage is approximately 3.5sqm/per litre.
- Enhances colour
- Excellent Coverage
- Durable and hard-wearing
- Easy to use and fast-drying
- Resistant to chemical including petrol and oil spillages
- Range of finishes
- Colour tints and Anti-slip additives are available
Available in 5ltr and 25ltr containers.
-
Imprinted Concrete Sealer 25LT
€180.00- 25lt Drum of clear seal,
- available in either a Matt or Gloss Finish.
- Our Seal is used by all imprinted concrete companies.
- Renew the look of your imprinted concrete
- Can used on block paving.
- 2 Hour Drying time
- Easy to use
- Colour pigment can be added to suit the colour of your imprinted concrete
-
Printing Polythene
€150.00A very thin grade of polythene which is used as an alternative to release agents when using printing moulds. As well as covering concrete to protect from rain damage.
- Width: 4m
- Length: 250m
- 15Mu/60 Gauge
For more information, please contact us.
-
-
Recess Man Hole
Price range: €65.00 through €147.00- Recessed cover & frame
- Integral lifting handle tested to withstand 120 kgs of direct lift
- Galvanised steel tray can be rotated to fit within the frame
- Cover can be turned to match direction of paving
- Eliminates the need to cut paving around a circular opening
Select options This product has multiple variants. The options may be chosen on the product page -
AquaSeal 20lt
€140.00Creteprint Aquaseal is a water-based acrylic concrete sealer which leaves a low sheen finish. Ideal for use indoors as it is fume-free and environmentally friendly. Aquaseal is also suitable for use on natural/indian stone.
Can be applied by brush, roller or sprayer, each 25ltr pail will cover approximately 75-80sqm.
- Seals and protects concrete surfaces
- Easy to use
- Excellent coverage
- Reduces dusting
- Durable and Hard wearing
- Fume free and enviromentally friendly
For any further information, please contact us
-
Snickers Trousers
€129.00Durable trousers with top-loading Cordura reinforced knee pad pockets and Cordura reinforced holster pockets and ankles. Advanced cut with twisted leg. 240g/m².
- 18 Pocket(s) Including 2 x Back, 2 x Side & 1 x Thigh
- Cordura-Reinforced Knees
- Twisted Leg for Working Comfort
- Water Repellent & Breathable Fabric
- 7 x Belt Loops
- Hammer Strap
- Zip Fly
- Double Lockstitch Seams
- Built-In Shirt Grips
- Relaxed Fit Design
Select options This product has multiple variants. The options may be chosen on the product page -
Arco ST910 Safety Boots
€120.00Select options This product has multiple variants. The options may be chosen on the product page -
Liquid Release Agent
€120.00Creteprint Liquid Release Agent is used to ease the removal of concrete imprinting mats/stamps, texturing skins and tools from the freshly placed concrete or cementitious materials used to imprint.
Through spraying Liquid Release onto the concrete surface and mats/tools it provides easier release with no sticking. Colour pigmentation can be added to provide two-tone effect.
Each 25ltr container will cover between 100 – 150sqm depending on method of application.
- Allows for easy removal of imprinting mats and tools
- Prolongs curing time of concrete
- Can be coloured for desired finish
- Easy to apply
- Excellent coverage
For more information and health and safety information please contact us.
-
Tarmac Revitaliser and Sealer
€120.00Tarmac Revitaliser and Sealer is a safe and easy to use product. Can be applied to any tarmac or asphalt surface and will seal and protect your tarmac, prolonging its lifespan whilst giving it that ‘just laid’ look only fresh tarmac has. Our Tarmac Revitaliser is easy to apply by roller, brush or squegee. Normal coverage is 40sqm per 20kg pail dependant on surface condition.
- Seals and protects tarmac/asphalt
- Easy to use
- Rejuvinates ‘old looking’ tarmac/asphalt
- Excellent coverage
- Fume-free and environmentally friendly
- Available in other colours
One coat is normally sufficient but a second coat may be necessary on porous and old tarmac. We recommend that tarmac is sealed every 12-24 months to keep your tarmac in good condition. Do not confuse this product with cheaper tarmac paints.
Surface Preparation
- Thoroughly clean and dry surfaces so that they are free from loose material.
- Remove moss, lichen and weeds by jet-washing, scraping, degreasing or wire brushing.
- Ensure the surface is completely dry before application.
Curing Time
- Drying time is normally touch dry after 5 hours, however moisture will delay the cure.
- Do not allow the coating to become wet an hour after application.
- After installation, the area should be kept clean and dry for 12-18 hours (depending on ambient temperatures) otherwise the product may become affected, resulting in discolouration and lack of cure.
-
Snickers Trousers Blue
€110.00Durable trousers with top-loading Cordura reinforced knee pad pockets and Cordura reinforced holster pockets and ankles. Advanced cut with twisted leg. 240g/m².
- 18 Pocket(s) Including 2 x Back, 2 x Side & 1 x Thigh
- Cordura-Reinforced Knees
- Twisted Leg for Working Comfort
- Water Repellent & Breathable Fabric
- 7 x Belt Loops
- Hammer Strap
- Zip Fly
- Double Lockstitch Seams
- Built-In Shirt Grips
- Relaxed Fit Design
Select options This product has multiple variants. The options may be chosen on the product page -
Thinners
€110.00Standard Thinners consist of reclaimed solvents and is used for the stripping of Creteprint Lusterseal for repairs and resealing of surfaces. Can also be used for the cleaning of tools and materials.
-
Yellow Wheelbarrow was €120.00 Now €100 on SALE!!!!
Original price was: €120.00.€100.00Current price is: €100.00. -
High-Vis Light Snickers Jacket
€90.00Durable work jacket made of hardwearing polyamide fabric featuring light polyester padding and certified Class 2 visibility. In addition, the jacket comes with CORDURA® reinforcements for enhanced durability and stretch panels for optimal mobility.
Developed for craftsmen who work in cold conditions and need warm and highly visible garments.
- Light padding.
- High-visibility Class 2.
- Dirt areas with CORDURA® reinforcement at front and sleeves.
- Stretch panels at sides for enhanced freedom of movement.
- Zip chest pocket with ID badge holder.
Select options This product has multiple variants. The options may be chosen on the product page -
Acid Wash
€90.00Acid Wash is used for preparing freshly imprinted concrete removing any residue left on the surface prior to applying Creteprint Lusterseal.
- Removes any left over residue from imprinting process
- Safe and easy to use on site
- Prepares surface for sealing
- Excellent coverage (can be diluted)
Acid Wash is available in 25ltr containers. For more information and health and safety details please contact us.
-
Arco ST210 Safety Boots
€80.00Select options This product has multiple variants. The options may be chosen on the product page -
Arco Black Safety Boots
€80.00Select options This product has multiple variants. The options may be chosen on the product page -
Blue Steel Finishing Trowel
€80.00Curved durasoft handle 25” X 5”
• Highest Grade blue steel
• Aluminium alloy Xtralite mounting is lightweight, but very strong
