• Imprinted Concrete Reseal Kit products by imprintedconcrete.ie

    Imprinted Concrete Reseal Kit

    220.00

    25 x Liters of seal

    1 x Tub of colour tint

    1 x Tub of crete grip

    1 x Brush

     

    For a limited time only 

    Add to basket
  • Imprinted concrete Sealer Dublin

    Gloss Lusterseal

    180.00

    Creteprint® Lusterseal Gloss is a high quality, clear, solvent based sealant which gives a professional, glossy finish for your driveway or patio on both imprinted concrete and block paving.

    Average coverage is 3.5sqm/per litre.

    • Enhances colour
    • Excellent Coverage
    • Durable and hard-wearing
    • Easy to use and fast-drying
    • Resistant to chemical including petrol and oil spillages
    • Range of finishes
    • Colour tints and Anti-slip additives are available
    Add to basket
  • Imprinted concrete Sealer Dublin

    Matt Lusterseal

    180.00

    Creteprint® Lusterseal Matt is a high quality, clear, solvent based sealant which gives a professional, low-sheen finish for your driveway or patio on both imprinted concrete and block paving. Average coverage is approximately 3.5sqm/per litre.

     

    • Enhances colour
    • Excellent Coverage
    • Durable and hard-wearing
    • Easy to use and fast-drying
    • Resistant to chemical including petrol and oil spillages
    • Range of finishes
    • Colour tints and Anti-slip additives are available

     

    Available in 5ltr and 25ltr containers.

    Add to basket
  • Imprinted concrete Sealer Dublin

    Imprinted Concrete Sealer 25LT

    180.00
    • 25lt Drum of clear seal,
    • available in either a Matt or Gloss Finish.
    • Our Seal is used by all imprinted concrete companies.
    • Renew the look of your imprinted concrete
    • Can used on block paving.
    • 2 Hour Drying time
    • Easy to use
    • Colour pigment can be added to suit the colour of your imprinted concrete
    Add to basket
  • Aqua Seal

    AquaSeal 20lt

    140.00

    Creteprint Aquaseal is a water-based acrylic concrete sealer which leaves a low sheen finish. Ideal for use indoors as it is fume-free and environmentally friendly. Aquaseal is also suitable for use on natural/indian stone.

     

    Can be applied by brush, roller or sprayer, each 25ltr pail will cover approximately 75-80sqm.

     

    • Seals and protects concrete surfaces
    • Easy to use
    • Excellent coverage
    • Reduces dusting
    • Durable and Hard wearing
    • Fume free and enviromentally friendly

     

    For any further information, please contact us

    Add to basket
  • Liquid Release Agent

    Liquid Release Agent

    120.00

    Creteprint Liquid Release Agent is used to ease the removal of concrete imprinting mats/stamps, texturing skins and tools from the freshly placed concrete or cementitious materials used to imprint.

    Through spraying Liquid Release onto the concrete surface and mats/tools it provides easier release with no sticking. Colour pigmentation can be added to provide two-tone effect.

    Each 25ltr container will cover between 100 – 150sqm depending on method of application.

    • Allows for easy removal of imprinting mats and tools
    • Prolongs curing time of concrete
    • Can be coloured for desired finish
    • Easy to apply
    • Excellent coverage

    For more information and health and safety information please contact us.

    Add to basket
  • Imprinted concrete Terra Tarmac Sealer

    Tarmac Revitaliser and Sealer

    120.00

    Tarmac Revitaliser and Sealer is a safe and easy to use product. Can be applied to any tarmac or asphalt surface and will seal and protect your tarmac, prolonging its lifespan whilst giving it that ‘just laid’ look only fresh tarmac has. Our Tarmac Revitaliser is easy to apply by roller, brush or squegee.  Normal coverage is 40sqm per 20kg pail dependant on surface condition.

    • Seals and protects tarmac/asphalt
    • Easy to use
    • Rejuvinates ‘old looking’ tarmac/asphalt
    • Excellent coverage
    • Fume-free and environmentally friendly
    • Available in other colours

    One coat is normally sufficient but a second coat may be necessary on porous and old tarmac.  We recommend that tarmac is sealed every 12-24 months to keep your tarmac in good condition. Do not confuse this product with cheaper tarmac paints.

    Surface Preparation

    • Thoroughly clean and dry surfaces so that they are free from loose material.
    • Remove moss, lichen and weeds by jet-washing, scraping, degreasing or wire brushing.
    •  Ensure the surface is completely dry before application.

    Curing Time

    • Drying time is normally touch dry after 5 hours, however moisture will delay the cure.
    • Do not allow the coating to become wet an hour after application.
    • After installation, the area should be kept clean and dry for 12-18 hours (depending on ambient temperatures) otherwise the product may become affected, resulting in discolouration and lack of cure.
    Add to basket
  • Standard-Thinners.jpg

    Thinners

    110.00

    Standard Thinners consist of reclaimed solvents and is used for the stripping of Creteprint Lusterseal for repairs and resealing of surfaces. Can also be used for the cleaning of tools and materials.

    Add to basket
  • Imprinted concrete Terra Acid Wash

    Acid Wash

    90.00

    Acid Wash is used for preparing freshly imprinted concrete removing any residue left on the surface prior to applying Creteprint Lusterseal.

     

    • Removes any left over residue from imprinting process
    • Safe and easy to use on site
    • Prepares surface for sealing
    • Excellent coverage (can be diluted)

     

    Acid Wash is available in 25ltr containers. For more information and health and safety details please contact us.

    Add to basket
  • Imprinted concrete Terra Algae Clean

    Terra Algae Clean

    65.00

    Perfect for cleaning tarmac, concrete, resin driveways, brick paving, moss, algae and litchen.

    Safe to use on all surfaces removing the most stubborn stains.

    Read more
  • Prewash 25ltr

    Pre Wash

    65.00

    Creteprint PreWash is used for cleaning surfaces prior to sealing, used for removing excess powder release agent, without leaving harmful residue that other products do that can affect the sealant.  Comes in both 5ltr and 25ltr quantities.

    For further information and health and safety instructions please contact us.

    Add to basket